About Me


I am Sajid Muhaimin Choudhury, an M.Sc. Engineer in EEE from BUET. I am currently working as a lecturer at the Department of Electrical and Electronic Engineering, Bangladesh University of Engineering and Technology.

I am an Ex-Notredamian and my school was Udayan Bidyalay at Fuller Road. I design small circuits using microcontroller and also design websites using Joomla and Wordpress.

10 comments:

  1. jitoSeptember 22, 2011 at 10:38 AM

    hi brother
    hope u r doing well,will u pls help me to programmed AT89C51 microcontroller?amar kache programmer nai,source code diye
    apni ki amake AT89C51 programme kore dite parben?hi brother
    hope u r doing well,will u pls help me to programmed AT89C51 microcontroller?amar kache programmer nai,source code diye
    apni ki amake AT89C51 programme kore dite parben?

    ReplyDelete
    Replies
    1. Dr. Sajid M ChoudhuryFebruary 24, 2012 at 8:25 PM

      I dont have a universal programmer that is needed to program a C51

      Delete
  2. AnonymousNovember 29, 2011 at 6:34 PM

    hello sir
    i read something about you and one project about Avr
    as you are a lecturer of electronic i have a question in this field
    i wanna send some text via one AVR to another Avr with C code
    could you tell me how can i do this thing....
    i couldn't find any email from you so i decided write down my question here...i'm waiting for your advise...
    thanks...by the way im from another country in middle east...hope you could help me...

    ReplyDelete
    Replies
    1. Dr. Sajid M ChoudhuryFebruary 24, 2012 at 8:26 PM

      best way to do it would be to use the USART (TxD, RxD ) with the microcontrollers. Have a look at the datasheet

      Delete
  3. AnonymousJanuary 4, 2013 at 10:59 PM

    hello sir ...i need a help
    can u guide a programme for moving car forward right, forward left n forward with delays on avr ATMEGA32
    ill be so glad .......sir

    ReplyDelete
  4. AnonymousJanuary 22, 2013 at 1:11 PM

    hello sir
    could u pls advice me where to get microcontrollers in chittagong

    ReplyDelete
  5. AnonymousJanuary 22, 2013 at 3:20 PM

    hello sir
    could u pls advice me where to get microcontrollers in chittagong????

    ReplyDelete
  6. AnonymousMay 26, 2013 at 1:55 AM

    HI
    I have designed the pcb using Eagle, but i dont know how to upload the firmware from fischl website into the IC. What connections do i need to make ?? Pls help..

    ReplyDelete
  7. AnonymousNovember 13, 2013 at 5:29 PM

    Hi Sajid

    I am beginner to using Proteus ISIS, i want to display character on led 8 X 8 matrix by using asm code pls tell me how to start.

    ReplyDelete
  8. UnknownJanuary 12, 2014 at 5:19 AM

    Hi , im a beginner in micro controllers , specially PIC series , do u have any advise for me ?
    I watched your proteuse teachings on Youtube . tnx for every thing

    ReplyDelete

Visit My Official Website at BUET

Contact Me
Sajid Choudhury
+9665650
Dhaka, Bangladesh